Table of Contents
Advertisement
TraPSON REAR PANEL CONNECTmONS
S-VHDEO and DVH-HDTV connections
are provided for high performance
laserdisc players, VCRs etc. that have this feature. Use
these connections
in place of the standard video connection
if your device has this feature.
Hfyour device has only one audio output (mono sound), connect it to the left audio jack on the television.
•
Refer to the operating
guide of your other electronic equipment
for additional
information
on connecting
your cables.
•
A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or Iine output (HNPUT: 3 in
the example on page 11). Refer to your VCR operating guide for more information
on line input-output
connections.
•
You may use VHDEO or S-VHDEO inputs to connect to Hnput 3, Hnput 4 or Hnput 5, but only one of these may be used at a time.
Connect only 1 component
(VCR, DVD player, camcorder,
etc.) to each input jack.
•
COMPONENT:
Y-PBPR (Input 1 & 2) connections
are provided for high performance
components,
such as DVD players and
set-top-boxes.
Use these connections
in place of the standard video connection
if your device has this feature.
Hnput 2 accepts
both composite
or component
video signals.
•
Your component
outputs may be labeled Y, B-Y, and R-Y. Hnthis case,
connect
the components
B-Y output to the TV's PB input
and the components
R-Y output to the TV's PR input.
o
Your component
outputs may be labeled Y*CBCR.
Hnthis case, connect the components
C B output to the TV's PB input and
the components
C R output to the TV's PR input.
o
You may use composite
video signal for Hnput 2-Hnput 5.
o
Htmay be necessary
to adiust THNT to obtain optimum picture quality when using the Y-PBPR inputs (see page 35).
o
To ensure no copyright infringement, the MONHTOR OUT output will be abnormal, when using the Y-PBPR jacks.
o
When using a DVHinput from a Set-Top-Box, it is recommended
that a 1080i or 720p input signal is used.
12
Advertisement
Table of Contents
