Table of Contents
Advertisement
HOW TO USE THE REMOTE
TO CONTROL YOUR PLASMA TV
(_
LAST CHANNEL (LAST CH) button
Use this button to select between the last two channels viewed (good for watching two sporting events, etc.).
(_
PICTURE-IN-PICTURE
buttons
See separate section on pages 32-34 for a description.
(_) SURF button
Press the SURF button to automatically
scan all active channel numbers (those set in memory) and display them as PIP sub*
pictures. Press the SURF button a second time to remove the sub-pictures from the screen.
NOTES:
1.
If no buttons are pressed when in SURF mode, auto-scanning
will continuously
scan channels in memory (see
page 50).
2.
If a channel is changed during this SURF scanning, sub-pictures
will be removed from the screen.
3.
If MOVIE/TV RATINGS LOCK setting is ON, PIP SURF mode will be deactivated.
4.
CLOSED CAPTION will net appear when PIP SURF mode is on.
5.
The SURF button will only work in ANT A and ANT B.
(_) VID1 ~ MID5
When the remote control is in TV mode, press these buttons to directly select the video input sources between the five video
inputs.
AN_;
©
(_
DAY/NIGHT button
Press this button to toggle between Day and Night picture mode settings. Select Day for day time viewing with more brightness
and contrast to compete with room light. Select Night for night time viewing with less brightness and contrast for a more detailed
picture.
31
Advertisement
Table of Contents
