Table of Contents
Advertisement
CONNECTING
PLASMA DISPLAY MONITOR TO AVC BOX
1.
From the owner's accessory you will find the Monitor Connector cable.
2.
Firmly, and securely insert the Monitor Connection Cable to the rear panel of the AVC box "TO MONITOR" connectors.
3.
Insert the other ends of the Monitor Connection
Cable to the display monitor rear panel "FROM AVC" connectors.
Back of Displa
Monilor
32142_
Baok ofD_pO!_y
aoo=tor
I NOTE:
Back of AVC Center
oAc
tlet
ToAC '-.
outlet
_8ack
of Ave Center
[__To
AC
outlet
The Display Monitor and the AVC Center have their own AC Power, Both AC cords must be completely plugged in to
the AVC Center and the display monitor, then plug them in to the AC outlets.
CONNECTING
EXTERNAL VIDEO SOURCES
The front panel jacks are provided as a convenience
to allow you to easily connect a camcorder or VCR as shown in the following
examples:
Front panelof AVC
(option_, s _, note)
@???
S-VHS
OUTPUT
Front panelof AVC
OUTPUT
S-VHS Video c_meta
J
==== I --G
I
I
I
NOTES:
1. Completely insert connection cord plugs when connecting to front panel jacks.
If you do not, the played back picture
may be abnormal.
2. If you have a S-VHS VCR, use the S-INPUT cable in place of the standard video cable.
3. If you have a mono VCR, insert the audio cable into the left audio jack of your AVC box.
4. S-VIDEO input takes priority over VIDEO input.
5. If you have a VHS or 8mm camcorder, use the S-VIDEO cable in place of the VIDEO cable.
13
Advertisement
Table of Contents
