Table of Contents
Advertisement
Incoming Exchange Line Calls
____"
11 To connect an incoming exchange line call to
a series of extensions in turn (SERIAL CALLS)
e
PRESS KEY S before calling the first extension. Lamp CS will glow.
e
CALL extension in usual way. The red exchange line lamp will remain glowing during
the call. When the extension user hangs up after completing the first call, the white
lamp in the exchange line key will also glow.
•
PRESS the EXCHANGE LINE KEY. Lamp CS will glow (to remind operator it is a
serial call).
e
CALL next extension required. Before extending to the last required extension, PRESS
KEY R to cancel the serial function.
12 An exchange line call TRANSFERRED TO THE
OPERATOR
by
an extension
An extension may hold an exchange line call, and call the operator by dialling 9.
e
The white and red exchange line lamps and GC will glow.
e
On Answer, lamps GL1 and IC will glow, and the red lamp flicker.
@ Speak to the extension (exclusively).
e
If required to take over the call, PRESS KEY C. Lamp IC will go out, EC will glow. ~
Extend call in the usual way.
e
To return the call to the extension, PRESS X.
Advertisement
Table of Contents
