Panasonic LS-400 Series Instruction Manual page 3

After teaching, P-1, P-2 and P-3 will be automatically relocated in ascending order:
i.e. the lowest value is placed in ' A ', the second lowest in ' B ' and the highest in ' C '.
<Window comparator mode>
A 1_SL B 2_SL
1. Press the MODE key once to select ' TEACH mode ' . "
displayed on the green digital display. Press the jog switch in
Blinking
the object present condition.
by turns
2. " " blinks in the green digital display. Press the jog switch in
Press
the object present condition for the second point.
3. " " blinks in the green digital display. Press the jog switch in
Press
the object present condition for the third point.
Press
4.
Blinking
by turns
In case stable sensing is possible:
" " blinks in the red digital display.
or
In case stable sensing is not possible:
" " blinks in the red digital display.
Blinking
by turns
Note
sensitivity will be set.
Turn
Press
Normal
mode
the adjustment or any switch operation is not carried out whitin a certain period of
time.
For details, refer to ' THRESHOLD VALUE FINE ADJUSTMENT FUNCTION '
Short span
Changed intensity
11 PRO MODE
can be set.
PRO1 mode setting
Responsetime
Press switchingfunction
Press
Turn
Hysteresis
function
Press
Turn
Turn
Press
Turn
Turn
Turn
Press
Turn
Emission
halt function
Press
Turn
high speed is selected in the response time switching function '
digits if ' ' for standard or ' ' for ultra long distance is selected.
response time switching function '
<Hysteresis mode>
C A 1_SL B 2_SL
Turn
Turn
Windowcompar-
ator mode tial mode
or
Press Press
Long span
Changed intensity
Turn
Hysteresis: Small
Hysteresis: Standard
Hysteresis: Large
The shift amount can be set in a range of
Turn
Light received sensitivity: Level 3
Light received sensitivity: Level 2
Light received sensitivity: Level 1
Laser emission: ON
Laser emission: OFF
' for ultra high speed or '
'.
PRO2 mode setting
-
C
" is
PRO3 mode setting
Turn
tial mode
Note: When the ultra high-speed '
in the response time change func-
tion' "
be set.
not be used.
PRO5 mode setting
The 0-ADJ setting function in this product was removed from production starting May, 2005.
Turn
' for
Note: Refer to '
SETTING' whe n usin g the
code setting function.
Display
switching function
Press
Press
Digital display switching on
Turn
Turn
Display
turningfunction
Press
Digital display turning: OFF
Digital display turning: ON
Turn
Turn
ECO mode
function
Press
Turn
Turn
Time period
holdingfunction
Press
Turn
Note:
Turn
Present value
storage function
Press
Turn
Stored value
comparison function
Press
Databank
Press loading function
Press
Press
Turn
Turn
Press
Turn
Turn
Data bank
saving function
Press Press
Turn
Turn
'
Press
" is set, " " cannot
Press
Press
Setting copy: OK
Turn
Transmi s si o n change
To permit / Not to Press
permit function
Transmission enable
Transmission disable
Turn
Turn
Press
Turn
setting function
Emission halt
Full-auto teaching
Limit teaching / plus side
Limit teaching / minus side
Turn
Turn
Backup
Press
function
Backup: OFF
Backup: ON
Turn
' in the response time change function '
Codesetting
Press
Press function
Turn
Reset
Press
function
Reset: OK
Turn
CUSTOM
mode display
Press
function
Response time
M.G.S.
Emission halt
Data bank loading
LIST OF CODE
12
Turn
ECO mode: OFF
ECO mode: ON
Hold: OFF
Hold: ON
In order to clear the value, set the time
period holding function to OFF once.
the value.
Stored
value
Incident light intensity
Press
For 1CH setting
Press
For 1CH setting
Press
For 1CH setting
Press
For 1CH setting
Press
Turn
' is set, the copy function can-
.
Turn : Code selecting
Press