Table of Contents
Advertisement
PS400JRB_Manual EN_090506 SE.qxp
• EXTENSION CORDS. Make sure your extension cord is in good condition. When using
an extension cord, be sure to use one heavy enough to carry the current your product will
draw. An undersized cord will cause a drop in line voltage resulting in loss of power and
overheating. The following table shows the correct size to use depending on cord length
and nameplate ampere rating. If in doubt, use the next heavier gage. The smaller the gage
number, the heavier the cord.
Volts
120V
240V
Ampere Rating
More
Than
0 -
6 -
10 -
12 -
SAFETY GUIDELINES / DEFINITIONS
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death
or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury.
CAUTION: Used without the safety alert symbol indicates potentially hazardous situation which, if
not avoided, may result in property damage.
RISK OF UNSAFE OPERATION. When using tools or equipment, basic safety precautions should
always be followed to reduce the risk of personal injury. Improper operation, maintenance or
modification of tools or equipment could result in serious injury and property damage. There are
certain applications for which tools and equipment are designed. Black & Decker strongly
recommends that this product NOT be modified and/or used for any application other than for which
it was designed. Read and understand all warnings and operating instructions before using any tool
or equipment.
THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR THE POWER
STATION MODEL PS400JRB.
WARNING: TO REDUCE THE RISK OF INJURY:
• Follow these instructions and those published by the battery manufacturer and manufacturer of
any equipment you intend to use with this unit. Review cautionary markings on these products and
on engine.
9/6/06
Minimum Gage for Cord Sets
Total Length of Cord in Feet
0-25
26-50
(0-7,6m) (7,6-15,2m)
0-50
51-100
(0-15,2m) (15,2-30,4m) (30,4-60,9m)
Not more
American Wire Gage
Than
6
18
16
10
18
16
12
16
16
16
14
12
SAVE THESE INSTRUCTIONS
Get other manuals https://www.bkmanuals.com
3:38 PM
Page 2
51-100
(15,2-30,4m)
101-200
16
14
14
Not Recommended
2
101-150
(30,4-45,7m)
201-300
(60,9-91,4m)
14
12
12
Advertisement
Table of Contents
