Remote Control - Philips FA 950 Manual

REMOTE CONTROL
2X1.5V
RO3 / UM4/ AAA
IMPORTANT:
All products of the Philips 900 series which are equipped
with their own remote control, also have an IR SENSOR
ON/OFF switch on the back of the unit.
When these units are incorporated in your HiFi system with
an ESI BUS connection, this IR SENSOR ON/OFF switch
should always be in the OFF position.
| The product can then be operated with the remote control
of your FA950 amplifier.
When these units are not used in a HiFi system the switch
| should be in the ON position.
| Make sure that the respective unit is switched off when
switching the IR SENSOR on and off.
Remote control from another room
You can control the system from another room by placing a
EM 2200/2201 'Pyramid' remote-control receiver in the room
and connecting it to the RC-5 input on the amplifier. The
'Pyramid' will pass on signals from the remote-control handset
to the amplifier.
BATTERIES
* Open the battery compartment and insert two batteries as
indicated, type RO3, UM-4 or AAA-cells .
¢ Remove the batteries when they have run down or if they
will not be used again for a long period.
10
USING THE REMOTE CONTROL
e First select the source you wish to control by pressing one
of the source select keys on the remote control (e.g. TAPE,
CD).
e Then, select the desired function.
AMPLIFIER
— VOLUME AUDIO - for adjusting the volume
~ SPEAKERS A/B - for speaker selection
— Source selectors
— MUTE - for decreasing the volume by 20 dB
~ STANDBY - for switching the complete system to standby
by pressing for longer than approx. 1 second
TUNER
— 0-9 digit buttons - for selecting preset stations; entering
data when programming timer or clock and when using the
direct tuning function
— PRESET/TRACK - next ~ or previous = preset station
— <4- to search down
- SCAN - for scanning preset stations
- MODE - for mono/stereo selection
— >> - to search up
— STANDBY - for selecting standby mode
CASSETTE DECK
~ PRESET/TRACK - next & or previous = track
— SCAN - for automatically playing the beginning of each track
on a cassette
— PLAY - for starting play
— STOP - for stopping recording/play
- PAUSE - for interrupting recording/play
- RECORD - for starting recording
— »» - for winding the tape in the playing direction
— «<- for winding the tape in the opposite direction
— DECK A/DECK B - for selecting deck A or B
~— MODE - for selecting the reverse mode
- STANDBY - for selecting standby mode
VCR
— 0-9 digit buttons - for selecting stations
— PRESET - next « or previous = station
— SCAN - for scanning a tape
— PLAY - for starting playback
- STOP - for stopping recording/play
- PAUSE - for interrupting recording/play
~ RECORD - for starting recording
— »» - for winding the tape
— «<- for rewinding the tape
— MODE - for language selection
- STANDBY - for selecting standby mode
cD
— 0-9 digit buttons - for track selection
— PRESET/TRACK - next = or previous = track
~ <4 - to search down
— >» - to search up
~ SCAN - for automatically playing the beginning of each track
— PLAY - for starting play :
— STOP - for stopping play
— PAUSE - for interrupting play
— OPEN/CLOSE - for opening/closing the CD compartment
— MODE - for playing in random order (SHUFFLE)
~- DISC ~ = (CD changer only) - for disc selection
~ STANDBY - for selecting standby mode