Table of Contents
Advertisement
BK-1632 STEREO MIXER
Output Jacks
RIGHT SUBGROUP OUTPUT
4C — MAIN OUTPUT
■—4B — LEFT SUBGROUP OUTPUT
BK-1632
ELECTRO-VOICE
BUCHANAN, Ml
49107
CAUTION
FOR CONTINUED.-
PROTECTION AGAINST FW£
•
hazaro replace with same
TYPE FUSE AS INCXCATEO
REMPVACER par UN FUSIBLE OE*
ME ME TYPE COMME INDK3UE
95*130 VAC
50/60 Hr 30 W
O 3 AMP 2SOV
SLO*BLOW FUSE.
ESTES
.a
senna
o
STACKING
GROUP
r.vmrigj
4D — MONITOR OUTPUT—' 4F — AUX SEND
4E - EFFECTS SEND
FIGURE 4 — Output Jacks
SECTION 4.0
4.0
REAR PANEL OUTPUT CONNECTORS
(Figure 4)
All output connections are line level, unbalanced, and
made through standard V-i-inch phone lacks. Each out¬
put is capable of driving 600 ohms or more to a max¬
imum level of +20 dBu. (See Specifications for details).
In the BK-1632 mixer all signal paths maintain polarity;
that is, a positive going signal at any input or insert point
will produce a positive going signal at the appropriate
output.
4A.
SUB R
RIGHT SUBGROUP OUTPUT
This output is derived by summing all of the inputs
(channels and external) assigned to the right
subgroup bus. A PAN control rotated fully
clockwise to the "R" position will assign that signal
only to the right bus.
4B.
SUB L
LEFT SUBGROUP OUTPUT
This output is the left subgroup equivalent of the
Sub R output.
4C. MAIN OUTPUT
The MAIN output is a 50/50 mix of the right and
left subgroup outputs. Since the BK-1632 is a true
subgroup mixer, all signals that appear in the main
mix must come through the subgroup channels.
4D.
MONITOR OUTPUT
The MONITOR output signal is the sum of all of the
input channel monitor sends and the external
monitor input signal.
4E.
EFFECTS SEND
The EFFECTS SEND output signal is the sum of
all of the input channel EFX/REV sends plus any
signal coming through the EFX IN.
4F.
AUX SEND
The AUX SEND output signal is the sum of all of
the input channel AUX sends (PRE- or POST EQ
and fader) plus any signal coming through the AUX
IN input.
ten
Advertisement
Table of Contents
