Safety Notes; Transport, Storage And Packaging; Technical Data - oventrop Regumat F-130 Installation And Operating Instructions Manual

2 Safety notes

2.1 Correct use
Safety in operation is only guaranteed if the connection
group "Regumat" is used correctly.
The fixed value control set allows to keep the flow
temperature in surface heating systems at a constant
level.
Any use of the valve outside of the above applications
will be considered as non-compliant and misuse.
Claims of any kind against the manufacturer and/or
his authorised representatives due to damages caused
by incorrect use cannot be accepted.
The observance of the installation and operating in-
structions is part of the compliance terms.
2.2 Possible dangers at the installation location
and during transport
The case of an external fire has not been taken into
consideration when constructing the fixed value control
set.
WARNING
Heavy product assembly
Risk of injury Suitable transport and lifting devices
are to be used. Wear suitable protective clothing
(e.g. safety shoes) during installation and use safety
devices. External components like handwheels or
pressure test points must not be misused for the
absorption of external forces, e.g. as connection
point for lever tools etc.
Hot and cold surfaces
Risk of injury Only touch with safety gloves and
inactivate installation before work commences.
Sharp edges
Risk of injury Only touch with safety gloves. Thre-
ads, bore holes and edges are sharp.
Small components
Risk of ingestion Store and install small compo-
nents supplied with the fixed value control set out
of reach of children.
Allergies
Health hazard Do not touch the fixed value control
set and avoid any contact if allergies against the
used materials are known..
2.3 Installation, initial operation, maintenance
Installation, initial operation, maintenance and repairs
have to be carried out by authorised and qualified tra-
desmen.
(EN 5011 part 1 and VDE 1000 part 10 for work on the
electrical installation).
8
3 Transport, storage and
packaging
3.1 Transport inspection
Upon receipt check delivery for any damages caused
during transit.
Any damage must be reported immediately upon re-
ceipt.
3.2 Packaging
Packaging material is to be disposed of environmen-
tally friendly.

4 Technical data

4.1 Performance data
Nominal dimension
Max. operating temperature
for standard pumps
Max. operating temperature
for high-efficiency pumps with
standard thermal insulation
Max. operating temperature
for high-efficiency pumps with
universal thermal insulation
Max. operating pressure
kvs value
Opening pressure check valve 20 mbar
Distance between pipe centres 125 mm
Connections
Fluids: Non-aggressive fluids (e.g. water and suitable
water and glycol mixtures according to VDI 2035). Not
suitable for steam, oily and aggressive fluids.
DANGER
Suitable measures (e.g. safety valves) have to be
taken to ensure that the maximum operating pres-
sures and maximum and minimum operating tem-
perature are not exceeded or undercut.
4.2 Materials
Ball valves:
Body and stem made of brass with double O-ring seal;
balls made of brass, hard-chrome plated;
PTFE seats;
collar nuts made of brass
Pump:
"Regumat F-130/180"
"Regumat FR-180"
DN 25
+110°C
+85°C
+95°C
10 bar PN10
2.2
G 1½ male
flat sealing
cast iron
bronze