Advertisement
9. Adding Users
A
From the Home screen go to devices. Select
the device you wish to add users to. Once in
the device main menu select users. (for sites
with multiple PAL units installed please call
technical support 866-975-0101 or refer to
complete manual)
Once in users click "add" in the top right hand
B
corner. (You can also import complete
databases, please call technical support or
see full instruction manual for detailed
instructions on this)
Once you have clicked "add" you will enter
C
the main user screen. Fill out the necessary
information and click save. Note: If you enter
a phone number the user can download the
"Palgate" phone application and will be able
to trigger the gate or door from their phone.
Leaving the phone number section blank will
not allow the user to have app control of the
PAL unit.
11. User Credentials - Bluetooth vs cellular
In this image you will see that the
"Nearby Only" box is checked. This
enables a Bluetooth Credential, so that
the user has to be in close proximity to
the gate in order to open it.
Leaving this box unchecked allows a user
to open the gate from anywhere via a
cellular signal.
10. PAL Settings
A
General – Allows you to configure
the relay output hold time.
B
Timer Events – Allows for setting a
7-day automatic unlock/open,
lock/close schedule.
C
Time Groups – Allows for creating
groups to restrict Wiegand and
phone application access to the
PAL controller.
12. PAL 4-Button Transmitter Programming
Each PAL Spider Controller includes a PAL 4-button
Transmitter. This transmitter can be programmed by:
1. Choose the Spider unit from the "Devices" section
2. Click on "Settings"
3. Click on the "Remote Control"
You will then see the menu below:
Buttons are designated
1-4 starting at the top and
going clockwise around
the remote.
You can program all 4
buttons to the relay of a
single PAL Spider; or if
you have multiple Spider
units, each button can be
programmed to a
different Spider Unit.
Advertisement
