GE WPGT9350 Technical Service Manual page 40

The factory test mode allows the service tech to the washer's graphics are displayed. Press
make adjustments and run several important the START/STOP pad once to cycle through
tests on critical washer components. the contrast screen (the black flips to the
opposite side).
1. Press the POWER pad to turn the washer on.
Press the HOME pad to ensure the home
screen is displayed.
6. Press the START/STOP pad. The TEST
LOAD screen is displayed.
2. Press the HELP pad. The main help screen is
displayed.
7. Using the test load screen:
3. Press the HELP and START/STOP pads
simultaneously for 3 seconds. The Factory Note: Read this section completely before using
Test Mode screen is displayed.
the TEST LOAD screen.
4. Press TEST LOAD on the LCD screen. a. Press the START/STOP pad to scroll
through the test list.
TEST LOAD
TEST BRAKE
TEST COLD VALVE ты
TESTHOTVALVE
TEST виваснумуво
TEST SOFTNERVALVE
SPECIAL ADDITIVE. TEST.
WATER -LEVEL FREQUENCY [CONTRAST
TORE TI
ELES