GE WPGT9350 Technical Service Manual page 23

Washer Components
The backsplash must be removed to access the
5
The main control board and touch screen LCD
control system components.
nt
ud
are attached to the backsplash as one unit, The
To remove the backsplash:
touch screen LCD and main control board are
1. Remove the 2 Phillips head screws that hold
Oly available as a complete assembly.
the backsplash in place.
To remove the main control board and LCD
touch screen assembly:
1. Remove the Backsplash,
2. Disconnect the ribbon at the right of the main
Control board.
2. Place a towel over the lid of the washer to
prevent scratches to the surface. Gently lift
each corner of the backsplash, then roll it
forward so it rests on top of the washer.
3. Disconnect the wiring to the keypanel.
Remove the backsplash.
-23-