This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference ● This device must accept any interference received, including interference that may cause ● undesired operation www.flammainnovation.com Shenzhen Flamma Innovation Co., Ltd...
5. Guitar in/out with individual guitar reverb effect 6. Optional 48V phantom power 7. Can be used as a microphone amplifier or a traditional stompbox 8. Two different output modes for mixed signal or individual signal from guitar and microphone www.flammainnovation.com Shenzhen Flamma Innovation Co., Ltd...
Lay out REVERB LINE IN GAIN XLR OUT LIFT DELAY CORRECTION DC IN TONE 9V 1.5A www.flammainnovation.com Shenzhen Flamma Innovation Co., Ltd...
Page 6
GUITAR OUT: Instrument output jack MIC: Microphone input GAIN: Gain level adjustment LINE IN: Line signal on/off 48V: On/off of 48V phantom power XLR OUT: Balanced output LIFT/GND: Grounding switch DC IN: Connect to power supply www.flammainnovation.com Shenzhen Flamma Innovation Co., Ltd...
Instructions 1. Reverb FV01 has three different classic reverb effects. The volume level of each reverb effect can be ● adjusted by rotating the REVERB knob. (Reverb type: RM for Room reverb, HL for Hall reverb, and PL for Plate reverb.) The Hidden Mode can be accessed by press and hold the footswitch.
Page 8
5. Line in Press to turn the line in function on/off. When line in is ON, FV01 can be used as a microphone ● amplifier for the microphone in MIC IN. Alternatively, it can also be used as a traditional stompbox.
Definition of operating conditions (indoor use, maintenance by specialized personnel) ● Possible damage from leaking batteries ● We need the manual in the language German, English, Spanish and French. ● www.flammainnovation.com Shenzhen Flamma Innovation Co., Ltd...
Page 12
Shenzhen Flamma Innovation Co., Ltd Made in China...