Please do not toggle the switch or rotate the knob heavily. ● Please do not let paper scraps, metal debris, or other items fall inside the unit. ● Please do not drop the device, and avoid heavy blows. ● www.flammainnovation.com Shenzhen Flamma Innovation Co., Ltd...
2.Individual control for subjacent/upper octave effect and dry signal 3.Modulation, reverb, and slow-attack effects are included 4.3 saving slots for quick recalling the user's preset parameters 5.Optional preset mode and real-time mode for different situations 6.9V power supply www.flammainnovation.com Shenzhen Flamma Innovation Co., Ltd...
Page 7
INPUT-L (MONO): 1/4″ mono audio input jack of right channel OUTPUT-L (MONO): 1/4″ mono audio output jack of left channel (For mono setup please connect to this jack) OUTPUT-L (MONO): 1/4″ mono audio output jack of right channel www.flammainnovation.com Shenzhen Flamma Innovation Co., Ltd...
In the FAVORITE mode, if any changes of parameters are made, the FAVORITE footswitch LED will 3.Saving Preset start to blink for reminder, and then the user can press and hold the FAVORITE until the footswitch LED blink quickly to confirm preset saving. www.flammainnovation.com Shenzhen Flamma Innovation Co., Ltd...
Press and hold the BYPASS while plugging in the power cord to power On the pedal, the BYPASS footswitch LED and FAVORITE footswitch LED will blink slowly and simultaneously, release the BYPASS footswitch, and the BYPASS footswitch LED will blink quickly to confirm factory reset is complete. www.flammainnovation.com Shenzhen Flamma Innovation Co., Ltd...
Power Requirements: 9V DC, center negative (To avoid damage, please do not use the power supply with >9V, or incorrect polarity) 85mm (D) x 120mm (W) x 33 (H) mm Dimensions: Weight: 0.367kg Accessories: Power Supply, Warranty Card, Logo Stickers, Quick Guide. www.flammainnovation.com Shenzhen Flamma Innovation Co., Ltd...
Page 11
Made in China www.flammainnovation.com Shenzhen Flamma Innovation Co., Ltd...
Need help?
Do you have a question about the OCTAVE FS23 and is the answer not in the manual?
Questions and answers