Auto Search (Setting Tv Channels) - Magnavox 20MS3442/17 Owner's Manual

You can set your TV to receive local TV chan-
nels (From an antenna) or Cable TV channels
(when you have Cable TV service). Then, use
Auto search to set up channels that are avail-
able for you. This makes it easy for you to se-
lect only the available TV stations when you
press CH+ or CH-. Before you start auto search,
connect the Antenna or Cable TV signal as
detailed on pages five and six; set TV/CATV
as described on page 11.
I Press MENU to see the menu.
Press VOL+ or VOL-to highlight
(Preset).
PressCH-toenterPresetsubmenu.
Press CH+ or CH-repeatedly to
highlight Auto search.
5
Press VOL+ to start programmingTV
channels. Press theVOL- if you need
to stop channel programming during
the process.
When channel setup is completed, the
TV will go to its Iowestchannel.
Auto search --
Programming
Please Wait
Stop
TV 2
Press CH+ or CH- to see
which channels are in the
TV's memory. You can still
select non-memorized
channels using the Number
buttons on the remote
control.
To delete unwanted chan-
nels from the TV's memory
or to add more channels, see
ADD/ERASE on page 15.
You cannot select Preset
menu if the TV is set to
AV1/S-video, AV2, orYUV.
Press TV/AV repeatedly to
get to the TV channels.
12