Advertisement
•
JOFRAN
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may have come
loose inside the carton during shipment. DO NOT use power tools to assembly.
Parts key
Code
No
1
2
2231- 405KDP41
3
2231- 405KDP42
4
2231P01F
STEP:01
- Carefully lay Chair Back flat on a smooth flat surface to prevent
scratches.
- Affix Complete Seat to Chair Back by inserting a Flat Washer, Lock
Washer and Short Screw (C) into each of the hole on the back of the
seat. Don't fully tighten at this point.(See
Detail A).
- Insert a Flat Washer, Lock Washer an Long K.D. Screw into each of 2
holes in the Complete Seat corners. Tighten screws with provided Key
Wrench. (See Detail B).
Tighten the three bolts in the center of the seat back.
- Carefully turn chair upside down and affix each Leg to the front
corners of the Complete Seat. Place Flat Washer, Lock Washer and
Medium Bolt (B) on each leg connection. Tightening the Bolt on each
Leg using provided Key Wrench. (See Detail C).
- Be sure to level the chair prior to tightening all the bolts.
*** FABRIC CARE:
Avoid direct sunlight ,water,oil,acid,sharp objects etc.
Use vacuum cleaner to clean. Wipe spills immediately.
If needed, spot clean with a mild water-based soap.
Fabric content 100% Polyester, Cleaning Code W
MADE IN VIET NAM
REV 23
INC.
Q ty
Description
1 pc
Chair Back
1 pc
Complete Seat
2 pcs Front Leg
4 pcs Floor glide
3
ASSEMBLY INSTRUCTIONS &
PARTS IDENTIFICATION
MODEL # 2231 - 405KD
TELLURIDE DRIFWOOD
UPH DINING CHAIR
---
Hardware Kit 2231-405KDP46P01
Code
Q ty
No
A
4 pcs Long Bolt 07.8 x 80mm
B
4 pcs Medium Bolt 07.8 x 50mm
�
3 pcs Short Bolt 07.8 x 35mm
C
�
e
D
11 pcs Lock Washer 08.5
11 pcs Flat Washer 08.5
E
@
1 pc
F
Description
Allen Key
3x
Al
!DETAIL
x4
1/1
Advertisement
