Controller Instructions; Button Instructions; Icon Instructions - Emerald EE-HWS-A1-220 User Manual & Installation Manual

CONTROLLER INSTRUCTIONS

BUTTON INSTRUCTIONS

POWER ON
- Sun is visible on screen.
STANDBY
- Screen is on but sun is not visible
POWER OFF
- Screen is blank.

ICON INSTRUCTIONS

SYMBOL
+
+ +
RT
SET
ºC
ON
OFF
1 Visible on screen / Not visible on screen
2 Visible on screen / Not visible on screen
3 Visible on screen / Not visible on screen
Visible on screen / Flashing
W
STAN
SILE
BOOS
ELE
HP
12
On/O
Button
Running
Mode
Up and
Dow
Clock
and
Timer
Setting
STATUS
Visible on screen
Visible on screen
Visible on screen
Visible on screen
Visible on screen
Visible on screen
Visible on screen
Visible on screen
Flashing
Visible on screen
Visible on screen
Visible on screen
Visible on screen
Visible on screen
Visible on screen
Visible on screen
Visible on screen
Visible on screen
Visible on screen
Visible on screen
Flashing
Flashing
Flashing
Flashing
Flashing
• Press button for 3 seconds to unlock the controller.
• Press button for 2 seconds to turn ON/OFF system.
• Press button to return to main control panel screen from any other screen settings.
• When the system is turned on press button to select di erent running modes.
• Press UP or DOWN button once to set target water temperature.
• Press UP or DOWN button for 3 seconds to open the system's running conditions.
• Under Timer or Clock setting status, press the UP or DOWN button to adjust
setting value
• Press button once to enter the real clock setting.
• Press button for 3 seconds to enter/exit the timer settings.
• Under timer settings, press button once to switch the timer setting value from
"hour" to "minute".
• Under timer settings, press and hold button for 3 seconds to cancel the current
timer setting.
System is in standard mode
System is in silent mode
System is in boost mode
System is in defrost
Service required
Compressor is running
Fan motor is running
Electric heating element is on for heating (only for the models with element)
Electric heating element is on for sterilisation (only for the models with element)
Current water temperature in the tank
Set target water temperature in the tank
Display actual water temperature, set water temperature, and fault code
Currently showing Celsius temperature
Real clock time
Timer is on
Timer function is activated
Timer function is deactivated
Timing period 1 set / Timer period 1 not set
Timing period 2 set / Timer period 2 not set
Timing period 3 set / Timer period 3 not set
The controller is locked
The Wi-Fi is connected / Wi-Fi is searching for connection
Timer setting on Monday, Tuesday, Wednesday, etc
Factory Mode
Choosing is in standard mode
Choosing is in silent mode
Choosing is in boost mode
Choosing is in electric heating element mode
Choosing is in heat pump mode
DESCRIPTION