Available Accessories; Troubleshooting - VYPER ROBUST STEEL MAX Assembly Manual

AVAILABLE ACCESSORIES

SIDEKICK
Need a drink?
How about two?
The SideKick contains two
stainless steel cup holders,
outside rubber protectors and
holes for cleaning brushes.
TOOL TRAY
Increase efficiency through
organization by adding a
tool tray to your chair!
TOWEL RACK
Keep your towels
clean and off the
ground with the
SideKick's Towel Rack.
BIG BOY
Increase the width of your
Vyper Chair seating with the
two side cushion adapters.
WHEEL LOCKS
Keep your chair from going
rogue by with our locking
caster attachment.

TROUBLESHOOTING

MY CASTER(S) DO NOT SWIVEL
BE SURE CASTER BOLTS ARE NOT OVERTIGHTENED
SLIGHTLY LOOSEN CASTER NUT (ITEM #5) UNTIL CASTER ROTATES
SMOOTHLY. IF PROBLEM PERSISTS INSPECT CASTER FOR DAMAGE
CHAIR HAS SLIGHT WOBBLE
ENSURE ALL NUTS AND BOLTS HAVE BEEN TIGHTENED
POWER TOOLS ARE NO RECOMMENDED. IF PROBLEM PERSISTS,
CRACK LOOSE LEG AND RAIL BOLTS. PLACE CHAIR ON FLAT AND
LEVEL SURFACE AND RE-TIGHTEN.
SEAT NOT STAYING AT DESIRED HEIGHT (QUICK HEIGHT MODEL)
REFER TO STEP 5
THE LONGER LEVER IS ON THE BOTTOM, ANGLED UPWARD AND
THE SHORTER LEVER (WITH WARNING LABEL) IS ON THE TOP,
ANGLED UPWARD AS WELL. THE LEVERS ARE TO GRIP THE FLATS
OF THE SHAFT.
(AS OF 11.01.22 - 3 LEVER QUICK HEIGHT SYSTEM UPDATED TO 2
HANDLE SYSTEM)
SEAT SHAFT DOES NOT GO THROUGH CENTER HUB
REFER TO STEP 1
ENSURE THAT THE CORRECT BOLTS WERE INSTALLED TO ATTACH
THE LEGS TO THE CENTER HUB.
VYPER INDUSTRIAL CUSTOMER SERVICE
(920) 301-3822 OR sales@vyperindustrial.com
VISIT WWW.VYPERINDUSTRIAL.COM