Download Print this page
Hide thumbs Also See for Mobileye Shield+ V2.0:

Advertisement

Quick Links

Mobileye Shield+™ V2.0
Recommended Testing Protocol

Advertisement

loading

Summary of Contents for Intel Mobileye Shield+ V2.0

  • Page 1 Mobileye Shield+™ V2.0 Recommended Testing Protocol...
  • Page 2: Table Of Contents

    Mobileye Shield+ v2.0 | March 2020 MOBILEYE, AN INTEL Recommended Testing Protocol COMPANY WWW.MOBILEYE.COM Table of Contents TABLE OF CONTENTS 1. INTRODUCTION 2. IMPORTANT SAFETY INFORMATION 3. TECHNOLOGY 4. ACRONYMS & TERMINOLOGY 5. TEST SCENARIOS...
  • Page 3: Introduction

    All scenarios assume a pedestrian is moving at a normal walking pace. 2. Important Safety Information Before using the Mobileye Shield+ v2.0, please read the following safety instructions and warnings carefully. The test scenarios are dangerous to perform. Please make sure you fully understand the different alerts of the Mobileye Shield+ and use caution when performing the scenarios.
  • Page 4: Technology

    Mobileye Shield+ v2.0 | March 2020 MOBILEYE, AN INTEL Recommended Testing Protocol COMPANY WWW.MOBILEYE.COM 3. Technology Mobileye Shield+ is an intelligent blind spot detection system for buses and large vehicles that utilizes multi-vision smart sensors to provide real-time alerts to drivers and is activated with enough time for the driver to act and avoid dangerous situations.
  • Page 5 Mobileye Shield+ v2.0 | March 2020 MOBILEYE, AN INTEL Recommended Testing Protocol COMPANY WWW.MOBILEYE.COM The Mobileye Shield+ Side cameras monitor a wider danger zone (width of up to 120cm according to the future potential of collision with a VRU. A red PCW warning will be generated based on the calculated TTC from the VRU.
  • Page 6: Acronyms & Terminology

    Mobileye Shield+ v2.0 | March 2020 MOBILEYE, AN INTEL Recommended Testing Protocol COMPANY WWW.MOBILEYE.COM 4. Acronyms & Terminology Term Description Mobileye Bus speed Pedestrian Distance to vehicle body Vulnerable Road User Pedestrian Danger Zone (for Pedestrians detection) / I_Z Impact zone 5.
  • Page 7 Mobileye Shield+ v2.0 | March 2020 MOBILEYE, AN INTEL Recommended Testing Protocol COMPANY WWW.MOBILEYE.COM Schematic Kinematics Description Passing Criteria 1kmh ≤ B_S ≤ 10kmh TEST: • A yellow alert should be PED is traveling perpendicularly triggered on the right I_Z: Front of car to the front of the car.
  • Page 8 Mobileye Shield+ v2.0 | March 2020 MOBILEYE, AN INTEL Recommended Testing Protocol COMPANY WWW.MOBILEYE.COM...