Table of Contents
Advertisement
en Basic settings
Basic setting
Water connection
Eco forecast
Emotion Light
Emotion Light 1
Emotion Light 2
Emotion Light 3
1
Factory setting (may vary according to model)
38
Selection
1
Cold water
Hot water
on
1
off
off
On via main
1
switch
On on opening
door
Level 1
Level 2
Level 3
Level 4
1
Level 5
See selection on
the appliance.
1
on
off
Description
Set cold water or hot water connec-
tion.
Only set the appliance to hot water if
this can be prepared with little energy
and a suitable installation is available,
e.g. solar heating system with circula-
tion line. The water temperature
should be at least 40 °C and max.
60 °C.
Switch EcoCheck on or off.
When selecting the programme, the
average water consumption and en-
ergy consumption is briefly shown on
the display.
Switch the interior lighting of the appli-
ance on or off.
When the appliance door is opened,
the interior lighting switches off auto-
matically after 10 minutes.
Set the brightness of the interior light-
ing.
Only available if "Emotion Light" is
switched on.
Tip: You can also set the brightness
of the interior lighting using the
Home Connect app.
Note: If you have used the Home Con-
nect app to create your own colour,
you cannot select "Emotion Light 1".
Select the colour of the interior light-
ing.
Only available if "Emotion Light" is
switched on.
Tip: You can also set the colour of the
interior lighting using the Home Con-
nect app.
Switch visual signalling of faults on or
off.
If an error occurs on your appliance,
the interior lighting will flash.
Only available if "Emotion Light" is
switched on.
Advertisement
Table of Contents
