Alignment
CTCSS Deviation
Set the transceiver to CH 1 (band center, wide devia-
tion) via the "Channel" box on the "Alignment" win-
dow previously.
Click the left mouse button on the "CTCSS Deviation"
button.
Click the left mouse button on the "Start" button.
Move the Slide Bar, as needed as, so that the deviation
meter reading is 0.75 kHz ± 0.1 kHz.
Press the "OK" box to lock in the new data.
14
Set the transceiver to CH 2 (band center, narrow de-
viation) via the "Channel" box on the "Alignment" win-
dow.
Click the left mouse button on the "Start" button.
Move the Slide Bar, as needed as, so that the deviation
meter reading is 0.4 kHz ± 0.1 kHz.
Press the "OK" box to lock in the new data.