REVERSE
ADVANCE
SINGLE/FAST
Slide the film speed control switch to the FAST position. While
pushing the filmstrip into the carrier, advance ^e filmstrip by
pressing the film advance button (Figure 3) until the FOCUS
frame appears on the screen.
HGUREa
4.
Adjust the framing by turning the framing knob on the side of
the unit until the complete frame is visible. Rotate the focus
knob to create a sharp, clear image on the screen. Flip the film
spring forward so that the filmstrip coil drops into the film cup
(Figure 4).
FIGURE 4
5.
To raise or lower the picture on the screen, press the elevation
button completely down on the control panel while you raise
or lower the projector (See Figure 5).
6