Sony SRS-XV500 Help Manual page 101

Hide thumbs Also See for SRS-XV500:

Table of Contents

Help Guide

Wireless Speaker

SRS-XV500

The sound from the speaker contains noise, skips, or is distorted

The connected USB device is not compatible with the speaker. Check on the information about the compatible

devices.

Turn off the speaker, disconnect and reconnect the USB device, and then turn the speaker back on.

Make sure that the audio file itself does not contain noise or distortion. Noise may be generated while an audio file is

encoded. If this is the case, delete the audio file and encode the original audio file all over again. If the sound from

the speaker contains noise or is distorted always at the same point in playback, this suggests that the file itself has a

problem.

The bit rate setting for creating or encoding audio files is low. Increase the bit rate and encode the original audio file

on the USB device.

Yy7855e