Wiring Table - MotoSAT FREEDOM Operation And Installation Manual

The Control Cable, 9 conductors, colored coded, 22Awg stranded that connects to the
mount with a twist lock connector is configured in the following manner:
Color Code
Black
Brown
Red
Orange
Yellow
Green
Blue
White
Purple
The Mount is coil wrapped inside with the following cables and wire:
· 2 ea RG179 Teflon coated coax cables
· 1 ea Control Cable, 9 conductor cable, colored coded, 22Awg stranded.
This cable is molded with a twist lock connector on one end and manually
terminated at the other with a 9 pin connector.
For any questions or comments please contact our
Technical Support Department at 1­800­247­7486.
WIRING TABLE
TV Mounts
Pin Designation Mount
Destination
1 Motor, Azimuth Positive
2 Motor Azimuth Negative
3 Motor Elevation/Positive
4 Motor Elevation Negative
Sensor, Count Azimuth
5
Sensor, Ground
6
Azimuth/Elevation
7 Sensor Count Elevation
8 Power, Mount LED
9 Not Used
Operation and Installation Manual
Counts
per Degree
3.408
5.034
9