MayPole MP9542 User Manual

Utility/ storage tent

UTILITY/ STORAGE TENT MP9542 USER

GUIDE

Please read this user guide before attempting to set up your Utility/ Storage

Tent. Follow the user guide carefully and keep for future reference.

A copy of the user guide is also available on our website

www.maypoleltd.com

1 |

P a g e

Table of Contents

Need help?

Do you have a question about the MP9542 and is the answer not in the manual?

Page 1 UTILITY/ STORAGE TENT MP9542 USER GUIDE Please read this user guide before attempting to set up your Utility/ Storage Tent. Follow the user guide carefully and keep for future reference. A copy of the user guide is also available on our website www.maypoleltd.com...
Page 2 UTILITY/ STORAGE TENT MP9542 USER GUIDE WARNING – GENERAL SAFETY • Not to be used in strong winds and extreme weather conditions. CARE OF YOUR UTILITY/ STORAGE TENT • Allow material to dry completely before storing in the storage bag provided.
Page 3 UTILITY/ STORAGE TENT MP9542 USER GUIDE PITCHING INSTRUCTIONS Remove the tent from the carry bag and place flat on the ground. Pre-assemble the 4 steel legs and 2 fibreglass roof poles. Insert each fibreglass roof pole into both roof sleeves: Insert one end of the fibreglass roof pole into each corner plastic socket.
Page 4 UTILITY/ STORAGE TENT MP9542 USER GUIDE Insert each steel leg into the opposite end of the corner plastic socket. Attach both plastic clips to each steel leg: Insert the metal pin ring into the base of each steel leg: Peg down each steel leg at the base and all pegging points found on each side.
Page 5 UTILITY/ STORAGE TENT MP9542 USER GUIDE Once in position; peg down the guy ropes found on each top corner and fully tension. It is recommended each peg is driven fully into the ground at an angle of 45 Degrees away from the pegging point The tent should now support itself.