Advertisement
About the Secure Firewall Management Center 1700, 2700, and 4700
What to do next
• Connect to the management center web interface using the network information that you have configured.
• Review the weekly maintenance activities that the management center configures automatically as part
• Configure the management center for IPv6 addressing after completing the initial setup using the web
• (Optional) Configure the management center for SOL or LOM access as described in
Redirect the Console Output Using the Web Interface
You must be an Admin user to perform this procedure.
Before you begin
• Complete the initial setup process of the appliance.
• Disable Spanning Tree Protocol (STP) on any third-party switching equipment connected to the device's
Procedure
Step 1
Choose System ( ) > Configuration.
Step 2
Choose Console Configuration.
Step 3
Select a remote console access option:
• (Default) Choose VGA to use the appliance's VGA port.
• Choose Physical Serial Port to use the appliance's serial port.
Step 4
Click Save.
Redirect the Console Output Using the CLI
Before you begin
Complete the initial setup process of the management center.
of the initial configuration process. These activities are designed to keep your system up to date and your
data backed up. For more information, see
interface, if required. For more information, see
Configuration
Guide.
Management, on page
17.
management interface.
Cisco Secure Firewall Management Center 1700, 2700, and 4700 Getting Started Guide
Redirect the Console Output Using the Web Interface
Review Automatic Initial Configuration, on page 14
Cisco Secure Firewall Management Center Device
.
Set Up Light-Out
11
Advertisement
