Table of Contents
Advertisement
Available languages
Available languages
en
ENGLISH
Then remove the power tool from the cut.
11.Disconnect the angle grinder.
12.Fold the lateral protective flap (1) forward until it
engages (the spindle must be at a standstill).
7. Maintenance, cleaning
Clean the power tool once a day. Tighten any
screws that have become loose. Check that all
moving parts are functioning correctly without
jamming, ensure that no parts are broken or
damaged to an extent that they impair operation of
the power tool. Have damaged or worn parts
repaired before using the tool. Many accidents are
caused by poorly maintained power tools.
Clean the power tool regularly.
8. Repairs
Repairs to devices must be carried out by qualified
specialists only!
If you have Metabo devices that require repairs,
please contact your Metabo service centre. For
addresses see www.metabo.com.
9. Environmental Protection
Observe national regulations on environmentally
compatible disposal and on the recycling of disused
machines, packaging and accessories.
10. WARRANTY
Metabo Corporation USA warrants the safety guard
against defects in workmanship of materials for a
period of 90 days from ship date to customer. The
responsibility of Metabo Corporation, USA. under
this Warranty is limited to replacement or repair of
defective parts at Metabo Corporation, USA, of
such parts as shall appear to us upon inspection at
such point, to have been defective in material or
workmanship, with expense for transportation
borne by Customer. WE MAKE NO WARRANTY
WITH RESPECT TO ACCESSORIES OR PARTS
OR PRODUCTS EMPLOYED BY THE USER WITH
THE SAFETY GUARD WHICH WERE NOT
DESIGNED FOR THE SAFETY GUARD OR
SUPPLIED BY METABO CORPORATION, USA.
UNDER NO CIRCUMSTANCES SHALL METABO
CORPORATION USA BE LIABLE FOR
PERSONAL INJURY OR DAMAGES (DIRECT,
INCIDENTAL, SPECIAL, OR CONSEQUENTIAL -
-INCLUDING LOST PROFITS) FROM THE SALE
OR USE OF THE PRODUCTS. THIS
DISCLAIMER APPLIES BOTH DURING AND
AFTER THE TERM OF THE WARRANTY.
Contacting Metabo Corporation, USA
Metabo Corporation
P.O. Box 2287
1231 Wilson Drive West Chester, PA 19380
Phone: 1-800-638-2264
Fax: 1-800-638-2261
Email: info@metabousa.com
www.metabousa.com
8
Advertisement
Table of Contents
