Drive Pulley Belt Stops - Simplicity 5200 Series Operator's Manual

Adjustments
1/4 to 3/8 inch farther to compress
the spring then tighten the setscrew.
A. Nut G. Clutch Rod Guide
B. Slot (in brake rod guide)
C. Brake Rod Guide H. Set Collar
D. Spring I. Brake Rod
E. Nut J. Clutch Rod
F. Idler Pulley K. Hole, 3/4" Dia.
4. Adjust drive pulley belt stops as fol¬
lows.
There should be 1/8 inch (3 mm) be¬
tween each belt stop and the belt when
the tractor clutch is engaged (pedal up).
See figure 33.