Acer AL1917 Service Manual page 20

Chapter 2
Operating Instructions
Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the
monitor. By changing these settings, the picture can be adjusted to your personal preferences.
• The power cord should be connected.
• Press the power button to turn on the monitor position. The power indicator will light up.
Front Panel Control
• (D/Power Button:
Power Indicator:
Green - Power on mode.
Orange - Off mode.
Activate OSD menu when OSD is OFF or activate/de-activate adjustment function when OSD is ON or Exit OSD
menu when in Volume Adjust OSD status.
Activates the volume control when the OSD is OFF or navigate through adjustment icons when OSD is ON or
adjust a function when function is activated.
Activates the volume control when the OSD is OFF or navigate through adjustment icons when OSD is ON or
adjust a function when function is activated.
Auto Adjust button I Exit:
1. When OSD menu is in active status, this button will act as EXIT-KEY (EXIT OSD menu).
The Auto Adjustment function is used to set the FIPos, VPos, Clock and Focus.
NOTES
• Do not install the monitor in a location near heat sources such as radiators or air ducts, or in a place subject to
• To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be removed with a
19