Simplicity LTH Series Operator's Manual page 5

Safety Rules
•
stop tractor and attachments and inspect for damage after
striking a foreign object. Repair any damage before
restarting and operating the equipment.
• Watch out for traffic when crossing or operating near
roadways.
• Operate oniy in dayiight or in good artificiai iight.
• Never make adjustment white the engine is running.
• After operation, ptace transmission controt tever in
forward position to hetp prevent accidentat starting.
• Operate oniy up and down the face of stopes; never across
the face. Do not stop or start suddenty on stopes.
• Reduce speed on stopes and in sharp turns to prevent
tipping or toss of controt. Use extreme caution when
changing direction on stopes.
• Be especiatty carefut not to touch tractor or attachment
parts which might be hot from operation. Aiiow such parts to
coot before attempting to maintain, adjust, or service.
• Stay aiert for hoies in the terrain and other hidden hazards.
Be extra carefut when operating on wet, stippery surfaces.
• if equipment begins to vibrate abnormatty, disengage
power to attachments and stop engine at once. Inspect lor
damage and correct before starting up tractor.
• Use care when pulling loads or using heavy equipment.
a. Use only drawbar hitch point.
b. Limit loads to those you can safely control.
c. Do not turn sharply. Use care when backing.
d. Use weights when recommended in the tractor or
attachment Operator's Manual.
• Disengage power to attachment(s) when transporting or
not in use.
WARNING
Never place hands near the hydro pump cooling fan
when the tractor is running. Cooling fan is located on
left-hand side of hydro pump inside the rear frame.
Cooling Fan Location (Shown with left-hand rear tire
removed.)
3