Denon POA-F100 Service Manual page 3

DISASSEMBLY
(Follow the procedure below in reverse order when reassembling)
1. Top Cover & Front Panel
Top Cover
(1) Remove 5 screws (1) fixing the Top Cover.
(2) Detach the Top Cover as shown in the arrow direction.
(3) Remove 4 screws (2) on the bottom and both sides.
(4) Disconnect 2P LED cable and 2P switch cable from their
connector bases.
(5) Pull the Front Panel in the arrow direction with releasing
Hooks on the Front Frame from the Chassis, and it comes
off with the Front Frame.
Front Panel
2. P.W.B. on Panel
FRONT P.W.B.
Detach the Front P.W.B. to the arrow direction with releasing
4 Hooks.
POA-F100 ma