Table of Contents
Advertisement
Handset and Base Operation
Conference Calling
The 2655 is capable of supporting conference calls between the two registered
Handsets and the Base Unit.
To enter a conference call, simply access the line with two or three extensions
by pressing ON (or HANDSFREE) on the Handset or SPEAKER on the Base.
The phone icon
in the upper left corner of the Handset.
Transferring Calls
You can transfer calls on the 2655 system from the Base to Handset, Handset
to Handset, or Handset to Base.
Blind Transfer
You can directly transfer any active call to another system extension without
notification by doing the following steps:
•
Handset or Base must be on an active call.
•
Press the INTERCOM key on the handset or PAGE key on the base
followed by the number of the Handset (1 or 2) or Base (0) that you wish
to transfer the call to.
•
When the other extension answers, the call will automatically be
connected to the other extension.
•
An unanswered call will ring back to the originating Handset/Base if not
answered within 30 seconds. And if it is still not answered within another
30 seconds, the call will automatically be terminated.
Announced Transfer
You can perform an announced transfer (call and advise another extension)
of an active call by following these steps:
•
Handset or Base must be on an active call.
•
Place the active call on HOLD.
•
Press the INTERCOM key on the handset or PAGE key on the base
followed by the number of the Handset (1 or 2) or Base (0) that you wish
to transfer the call to.
•
When the other extension answers the intercom call, explain they have
an active call waiting.
•
Either extension can press the OFF key on the handset or PAGE key on
the base to end the intercom call.
•
The other extension presses ON (or HANDSFREE) on the Handset, or
SPEAKER on the Base to pick up the call on hold.
and two or three extension numbers will be displayed
28
Advertisement
Table of Contents
