Vcr Set - Canon ELURA 50 Instruction Manual

[] Notes:
• When adding sound using the built-in microphone, make sure not to connect
any cables to the MIC terminal.
• "[b use your TV to monitor video, connect the S-video terminal ([2_134) or the
AV terminal (use only the video plug) to your TV. You can monitor tile sound
with headphones only when using the S-video terminal (_ 33).
Turn the camcorder's POWER switch to PLAY (VCR) and move tile camcorder's
TAPE/CARD switch to TAPE. Load a recorded cassette.
• Make sure tile REC/SAVE tab on tile cassette has been slid to REC (closed
position).
4j
= Do not connect/disconnect any cables to/from the camcorder when dubbing audio
or preparing to dub audio.
.... i.v0. sET 0. I 1..00,0 000 . 0,o , .
( [_ 39)
1. Open the menu and select VCR SET UP.
2. Select AUDIO DUB.
3. Select AUDIO IN or MIC. IN and close the menu.
96