Table of Contents
Advertisement
TK-230/230(SC)
INSTALLATION
3. How to replace the top panel
1) Remove the two screws holding the top panel ( @).
2) eon the red lead fixed to the TX-RX unit (B/2)
(@).
using nippers or the like.
(@)
Top panel
3. How to set the channel switch stop position
4. Scan capability enabling (See page 4)
The type can be changed to the SCAN type by
removing R35 of the control unit (X53-3210-XX).
5. KDM-4/4A
5-1. How to install the KDM-4 (See page 9)
How to mount the KDM-4 on the basic radio.
1) Remove the TK-230 front panel.
Remove cable J1 with connectors from the micro-
phone unit.
2) Insert the two cables with connectors for the front
panel (KDM-4) with keyboard into connectors J1 and
J2 on the TX-RX unit, and install the KDM-4 on the
TK-230, (J1, J2: See page 18)
5-2. Outline
5-3. Functions
«
Key operation section
The functions of the keys as a set differ according to
the type of main unit (BASIC/SCAN).
1) BASIC UNIT VERSION
Ci }Jb2}b3jle4
[4 }iLsjlejls }
[7] Ls] LJ (ame)
[x |} [Lo | L#_J Lent}
The basic key functions are as follows :
(F}
No function
(ENT)
ENT Key: Repertory
Advertisement
Table of Contents
