Loddng Video Inputs - Toshiba 27AF42 Manual

To unblock all blocked channels:
Note: This will unblock every channel you have blocked. _m cannot
unblock individual channels.
1. Press MENU.
2. Press < or _ m highlight the SET UP menu.
3. Press at or T m highlight V-CHIP CONTROL.
4. Press < or _ to display the PIN code entering screen.
5. Use the CHANNEL NUMBERS (0-9) m enter your Rmr-digit
PIN code. After entering the code, the V-Chip Control menu
appears.
6. Press at or T m highlight BLOCK CHANNEL.
7. Press < or _ m display the BLOCK CHANNEL menu.
SET/CLEAR will be highlighted.
8. Press < or _ m highlight CLEAR.
9. Press T m clear _1 blocked channels from the list.
10. Press EXILE
RECALL
@
@
@
@
@
MUTE
®
@
@
@
POWER
@
®
-- CHANNEL
NUMBERS
-- MENU
-- EXIT
Locking video inputs
_m can use the Video lmck feature m block the input sources
(Video 1, Video 2, Video 3, and ColorStream) and channels 3 and 4.
Note: The Video Ix_ck feature is independent of the Enable Blocking
option of V-Chip control (p_e 21).
The Video Lock options are:
Video: Blocks Video 1, Video 2, Video 3, and ColorStream.
Video+: Blocks Video 1, Video 2, Video 3, ColorStream, and
channels 3 and 4.
Off." Disables the Video Ix_ck feature.
To set up video lock:
1. Press MENU.
2. Press < or _ to highlight the SET UP menu.
3. Press at or T to highlight V-CHIP CONTROL.
4. Press < or _ to display the PIN code entering screen.
5. Use the CHANNEL NUMBERS
(0-9) to enter your _mr-digit
PIN code. After entering the code, the V-Chip Control menu
appears.
6. Press at or T to highlight VIDEO LOCK.
7. Press < or _ to select either VIDEO, VIDEO+, or OFE
@ @ ©
SET UP
HOVE [v_] START [ 1 k]
@ @ @
SET UP
5rFr B,_',,%ka_ #
I I I| _tll IIIIII _Ir_l I I| _lllr_l I I| _I| [I]+| I
HOV_ [v_] $ELE(;T [ < I']
8. Press EXIT.
Note:
In normai 71/viewing if you cannot accessthe
_nputsources (Video l, Video2, Video3, or
ColorStream) or channel 3 or 4, make sure
VideoLock is set to OFF+
25