Advertisement
welcoming • sophisticated • inspiring
WARNING
UNIT MUST BE PERMANENTLY FASTENED TO THE WALL WITH PROVIDED HARDWARE; THIS
STORAGE UNIT IS NOT DESIGNED OR INTENDED FOR FREESTANDING USE.
allen + roth
®
is a registered trademark
of LF, LLC. All Rights Reserved.
ATTACH YOUR RECEIPT HERE
Serial Number
Purchase Date
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-866-439-9800, 8 a.m. - 8 p.m., EST, Monday - Friday.
ITEM #5130289, 5130290
Wood Closet Kit
MODEL # LWSCSC，LWSCSBW
Français p. 22
Español p. 43
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Allen + Roth LWSCSC
Summary of Contents for Allen + Roth LWSCSC
- Page 1 ITEM #5130289, 5130290 allen + roth ® is a registered trademark of LF, LLC. All Rights Reserved. Wood Closet Kit MODEL # LWSCSC，LWSCSBW Français p. 22 ATTACH YOUR RECEIPT HERE Español p. 43 Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer...
- Page 2 TABLE OF CONTENTS PACKAGE CONTENTS Camlock System Operation....................2 Package Contents....................... 3 Hardware Contents.......................4 Safety Information....................... 6 Preparation ......................... 6 Assembly Instructions......................7 Care and Maintenance ....................... 17 Troubleshooting........................17 Warranty..........................19 Replacement Parts List ...................... 19 CAM LOCK SYSTEM OPERATION DETAIL A DETAIL B CAM LOCK...
- Page 3 HARDWARE CONTENTS (shown not actual size) HARDWARE CONTENTS (shown not actual size) 1/4 x 1-1/4 in. Lock Flat Large Medium Large Drawer Handle L - Bracket Barrel Nut Bolt Washer Washer Cam Lock Cam Bolt Cam Bolt Qty. 1 Qty. 8 Qty.
-
Page 4: Safety Information
ASSEMBLY INSTRUCTIONS SAFETY INFORMATION Base Assembly Please read and understand this entire manual before attempting to assemble, operate or install 1. Press the release lever on slides (U) and the product. remove the slide runner. • Do not allow children to climb or play in or around this product. Release Lever •... - Page 5 ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS 4. Attach base panel right (I) to assembly using large 7. Attach base panel left (H) to assembly using large wood dowels (HH) and large cam locks (DD). wood dowels (HH) and large cam locks (DD). Note: Make sure previously inserted medium cam bolts Note: Make sure previously inserted medium cam bolts (EE) are completely seated.
- Page 6 ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS 10. Attach hutch panel left (A) and hutch panel right (B) to 12. Carefully rest hutch assembly on its side. Insert hutch panel back (D) and either front curved stretcher (E) barrel nuts (VV) and large cam bolts (UU) into the or front straight stretcher (F) -- depending on which fits bottom of the hutch assembly.
- Page 7 ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS 15. Insert drawer bottom panel (T) into drawer left 18. Insert the drawer into the assembly by pressing Hutch panel (R), drawer right panel (Q) and drawer back down the release levers on the slide runners and panel (S).
-
Page 8: Pole Installation
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS 20. With the help from another person, carefully 22. Attach long shelves (V) to hutch panel left (A) and hang the unit onto wall hanging cleat (O). hutch panel right (B) with L-brackets (SS), securing with M4 x 14 mm wood screws (MM). Hardware Used M4 x 14 mm Wood Screw x 16... -
Page 9: Care And Maintenance
ASSEMBLY INSTRUCTIONS CARE AND MAINTENANCE • Periodically check to make certain all components are properly positioned, free from damage and 24. Attach open pole holders (YY) to hutch panel firmly connected. left (A) and hutch panel right (B), securing with M4 •... -
Page 10: Warranty
WARRANTY TROUBLESHOOTING This product (exclusive of shelves) is warranted to the original purchaser. If there is a failure in PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION this unit due to defects in materials or workmanship, the manufacturer will repair or replace this One end of metal pole The opening of open pole holder Use a quality level to ensure the flat... - Page 11 Touch-up Pen 00LWSCSC/LWSCSBW-49 Open Pole Holder 00LWSCSC/LWSCSBW-50 Closed Pole Holder 00LWSCSC/LWSCSBW-51 M4 x 15 mm Self-tapping Screw 00LWSCSC/LWSCSBW-52 Complete Hardware 00LWSCSC/LWSCSBW-53 Printed in Vietnam allen + roth® is a registered trademark Date: 2023-08-25 Rev. 0001-A of LF, LLC. All Rights Reserved.
Need help?
Do you have a question about the LWSCSC and is the answer not in the manual?
Questions and answers