Arc484B41 - Daikin FTKM-U Series Service Manual

ARC484B41

2. ARC484B41
Signal transmitter
Receiver
• To use the remote controller, aim
the transmitter at the indoor unit. If
there is anything to block signals
between the unit and the remote
controller, such as a curtain, the unit
will not operate.
• The maximum distance for
communication is about 7 m.
1
POWERFUL button
• Starts POWERFUL operation.
MODE button
• Selects the operation mode.
DRY COOL
2
ECONO button
• Starts ECONO operation.
3
COANDA /STREAMER
• Starts COANDA operation or
STREAMER operation.
5
GOOD SLEEP button
• Starts GOOD SLEEP operation.
TIMER CANCEL button
• Cancels the timer setting.
6
DEW CLEAN button
• To start dew clean operation, press
DEW CLEAN button for 2 seconds.
• To cancel dew clean operation, press
ON/OFF button on remote controller.
Child lock
• When you press ECONO button and POWERFUL button at the same time for 5 seconds or more, "
the remote controller LCD and all buttons on the remote controller will be disabled. To cancel the Child lock, press ECONO button
and POWERFUL button at the same time for 5 seconds or more again.
Reference
Refer to the following pages for details.
1 POWERFUL Operation
2 ECONO Operation
3 COANDA Operation
4 Flash Streamer Air Purifying Operation
48
FAN
4
button
ON/OFF TIMER button
• Each pressing of this button
advances the time setting by
1 hour.
• The time can be set between
1 to 12 hours.
P.33
P.33
P.29
P.32
Display (LCD)
• Displays the current settings. (In
this illustration, each section is shown
with all its displays on for the purpose
of explanation.)
ON/OFF button
• Press this button once to start
operation.
Press once again to stop it.
TEMPERATURE
adjustment button
• Changes the temperature setting.
FAN
• Selects the airflow rate setting
every time you press this button.
• When the airflow is set to "
indoor unit quiet operation will start
and the noise from the unit will
become quieter.
• In indoor unit quiet operation,
operation sound becomes weak.
(The airflow rate also decreases.)
• In DRY operation, the airflow rate
setting is not available.
SWING
• Adjusts the airflow direction.
• When you press SWING button, the
flap moves up and down, or (and)
the louver moves right and left. The
flap (louver) stops when you press
SWING button again.
5 GOOD SLEEP Operation
6 DEW CLEAN Operation
7 Fan Speed Control for Indoor Unit
8 Auto-swing
SiMX042215E
: DRY Not available
: COOL 20 ~ 32 °C
: FAN Not available
7
setting button
8
button
" will be displayed on
P.31
P.34
P.29
P.28
Part 5 Remote Controller
",
R5000391