Table of Contents
Advertisement
INSTALLATION
Before You Install
1 Choose a location for the Base near an electrical outlet and a telephone jack. This phone
requires a modular telephone jack and a standard electrical outlet (110v AC) not controlled
by a wall switch. Plug the AC power adaptor into the electrical outlet and the DC
connector to the jack on the bottom of the Base Unit.
2 Install the Handset battery pack. Use only Battery Pack provided or recommended by
VTech.
3 Attach the Belt Clip to the cordless Handset (optional).
NOTE: Install the Base Unit away from electronic equipment, such as personal computers,
television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture
4
.
Advertisement
Table of Contents
