Zanussi ZF 80/30 FF Instruction Booklet page 13

Cool check temperature guide
The guide consists of a temperature sensitive strip
sealed in the shelf trim.
When the fridge is operating at the safe
temperature to store food, the guide will appear
black. If the temperature rises above this level the
guide will show the words TOO WARM.
Important
The guide is only suitable for use in the model
supplied and accurate temperature guidance
cannot be guaranteed if transferred to other
appliances. The guide will not operate in the
freezer compartment.
Everyday use of the cool check temperature guide
During everyday use a fridge door is opened many
times and as a result temperature fluctuation may
occur. A Zanussi fridge is designed to cope with
any changes in temperature but under certain
conditions the temperature guide in the appliance
may show TOO WARM.
What to do if the cool check temperature guide shows TOO
WARM
The temperature guide may show TOO WARM if:
1. The fridge is switched off.
ACTION: Start the appliance in accordance with
the instructions.
2. The fridge door has recently been opened or is left open
for more than approximately one minute.
ACTION: As mentioned before the temperature
guide is sensitive to changes in fridge
temperature and opening the fridge door may
cause the guide to show TOO WARM. This
should not cause concern as such fluctuations in
temperature do not generally affect the safe
storage of food.
Leave the fridge door closed for as long as
possible so the temperature returns to a safe
level, the guide should then appear black.
3. The fridge has been loaded with fresh shopping.
ACTION: When fresh shopping or additional
quantities of food are placed in the fridge, the
temperature may rise and cause the guide to
show TOO WARM.
Do not adjust the thermostat as the time taken
for the guide to appear black will depend on the
quantity of food introduced and the temperature.
4. The fridge temperature is above the recommended
maximum for the safe storage of all food types.
ACTION: To lower the fridge temperature, adjust
the thermostat, then leave the appliance
overnight before checking the guide again.
5. If the guide is still showing TOO WARM, contact
your local Zanussi Service Centre.
13