Advertisement
The PSC RF Multi Mini contains two, separate, active 1 x 3 RF splitters for use with up to three
(3) diversity receivers. This compact, rugged device was developed using the latest super low
noise, high current RF amplifiers and will operate over various frequency ranges based on
which bandpass filter the unit is built with. Its two inputs are traditional BNC connectors for
ease of use in interfacing with your external antennas.
The PSC RF Multi Mini also can provide power to external powered antennas or remote line
amplifiers. Each of the SMA outputs offers a typical isolation factor of 24 to 28dB between
radio receivers.
RF BNC Inputs Marked as "A" and "B"
Power Switch:
RF SMA outputs Marked as "A" and "B" Sides
4 Pin Hirose Power Connection
"ON" powers up main unit.
"ANT PWR" powers up unit and provides power to
remote powered antennas or RF amplifiers.
Advertisement
