Ulrich Brunner GmbH reserves the right to make technical changes insofar as they serve technical progress or are required by safety regulations. Storage of the documents These instructions for Extension board 'Basic' (EWP Basis) are kept by the operator of Extension board 'Ba- sic' (EWP Basis) after use for future reference. IMPORTANT...
For your safety Dangers and safety measures The assembly, installation, maintenance and servicing of Extension board 'Basic' (EWP Basis) may only be carried out by a specialist company. • Only carry out activities that are described in these instructions. Electric shock Work on the electrical installation may only be carried out by a qualified specialist company.
Product description Intended use The Extension board 'Basic' (EWP Basis) can only be used in conjunction with other BRUNNER units. For example, with BRUNNER log boilers (Scheitini, Scheitikus or Scheitikum), BRUNNER pellet boilers (Pelletini, Pelletikum, Pelletikus) or the electronic stove control (EOS).
Page 10
Frost protection The Extension board 'Basic' (EWP Basis) is equipped with heating circuit frost protection. This has priority over all selected settings. As soon as the specified outside temperature (frost protection) is reached, the in- active circulation pumps of the heating circuits are automatically switched on. If the circulation pumps are al- ready active, this function is omitted.
Ulrich Brunner GmbH Notes on protecting your personal data Ulrich Brunner GmbH always endeavors to save and process only the personal data that are necessary and indispensable or that are required to be stored and processed by law. We strictly adhere to the requirements of the General Data Protection Regulation (GDPR) and the Federal Data Protection Act (BDSG and BDSG new).
Page 14
Illustration 1: EWP basis with tiled stove Illustration 2: Home view with EWP Basis with + EOS and auxiliary heating 1 (oil boiler) Brunner log boiler, without auxiliary heating Illustration 3: EWP basis with Brunner log boiler and auxiliary heating 1 (oil boiler) Instructions for use EWP Basis (2.33)
= online with mybrunner Button for the home view of the BRUNNER boiler, the entire boiler control system Button for the home view of the heating system; the entire control of the heat consumers and heat gener- ators;...
Individual settings 4.6.1 Individualization of the display The touch display of the BRUNNER systems can be customized with various display options. This chapter describes all the setting options for the display presentation. Touch the Settings button and enter your PIN code.
Page 31
Illustration 22: System/Anlage site 1 Illustration 23: System/Anlage site 2 If you are the operator (end customer) of the BRUNNER system click on the gray button next to“Kunde”. The highlighted field turns orange. When clicked the Subject button or Max@muster- mann.
3. if the system or control panel is now running an update sequence? Please wait until finished and try again. Instructions for enabling Service access The access to service functions can be enabled exclusively for heating contractors or BRUNNER service technicians. Mutual access for both categories of servicemen is not possible.
Page 37
3.3 Enter your password (entered beforehand and repeat - see 1.8) 3.4 The control unit (touch display) of the Brunner system must be reg- istered. To do this, click the New Control Neues Bedienteil. NOTE: If you had previously registered a different control unit, click the Add another control unit button Weit- eres Bedienteil hinzufügen.
Page 42
PC. 7. Registration of your Brunner system 7.1 The control unit (touch display) of the Brunner system must be reg- istered. To do this, click the New Control Unit button Neues Bedien- teil.
Page 45
The current overview of your system will appear on the screen of your PC, notebook, tablet or smartphone. On the Touch Display of your BRUNNER system To see the myBRUNNER status click: Settings + PIN-Code (9999) / Bedienteil(=control panel)/ my-...
Page 46
Enabling for Service access To enable Service access for BRUNNER technicians or a heating contractor, the owner of the system must approve it first. This is done using a fixed Service PIN Code, which is defined in the User account.
(digital or analog clock) selected as the screen saver. The disabled time alignment is displayed with a gray box. The adjustment of the time or date with the BRUNNER network can be activated at any time. 4.7.4 Set up WLAN 4.7.4.1 Set up WLAN - during commissioning Commissioning is user-defined.
Information and error messages Based on the highest industry standards, all BRUNNER expansion boards have a detailed safety concept. The controller not only regulates and monitors the current operating status, but also independently and continuously checks the function of all connected sensors, motors and mixers.
List of error codes The following is a list of error codes that can appear at Extension board 'Basic' (EWP Basis) and are shown on the display: Error text Error text Description Note to the operator Temperature sensor B-E06 Heating circuit 1 is defective or not connected.