Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Siren Marine SirenSat Offshore
Summary of Contents for Siren Marine SirenSat Offshore
- Page 1 Installation & User Guide...
-
Page 2: Product Overview
The SirenSat Offshore system provides a practical solution for offshore vessel tracking beyond cellular range. This provides the ability to collect regularly updated location data that can be accessed through the Siren Marine smart device app and Siren Marine fleet app. The SirenSat Offshore also meets the requirement of several marine insurance companies that require vessels to have a satellite tracking application. -
Page 3: Getting Started
Siren Marine Main Device ● A main device hub such as the Siren 3 Pro, Siren 3, or MTC must be installed on your vessel to operate all Siren Marine devices and send data to the Siren Connected Boat app. - Page 4 Pairing the SirenSat Offshore The SirenSat Offshore system must be paired to the Siren Connected Boat app prior to installation. The base of the SirenSat Offshore will have a barcode with serial number that is required to pair the system. Follow these steps to pair the SirenSat Offshore: 1.
-
Page 5: Installing The Batteries
OFF position. Once the switch is toggled ON, a location message will automatically be sent to the Siren Marine server. This will report up to every five minutes depending on boat motion as specified in the device overview. Location messages will then be updated to both the Siren Connected Boat app and fleet app. - Page 6 Mounting For best performance, it is recommended to mount the SirenSat Offshore outside and fully exposed to the sky with a clear 180° view. The antenna is also 100% weatherproof so exposure with water will not affect its operation. If this is not an option, the SirenSat Offshore can also be mounted in a location covered by wood or fiberglass (i.e.
- Page 7 Wiring The SirenSat Offshore antenna should be connected to a battery source and external input sensors using the supplied wire harness. Please refer to the table and wiring diagram below: sirenmarine.com...
-
Page 8: Connecting To External Power
Please note that the SirenSat Offshore antenna consumes 0.27 mAh of battery power per day as it has been programmed to make a connection to its satellite system up to every five minutes. This frequency allows the Siren Marine geofence capabilities to be used while external to cellular coverage. - Page 9 Location Updates The SirenSat Offshore will send a location message to the Siren Marine server up to every five minutes depending on boat motion. Location updates are subject to change every 30 minutes if not in motion. SirenSat Offshore vessel tracking updates will appear on the mobile app as a yellow tracking line, versus the red tracking line used to show the vessel is connected via cellular.
-
Page 10: Coverage Map
Coverage Map sirenmarine.com... -
Page 11: Technical Specifications
Technical Specifications sirenmarine.com... - Page 12 sirenmarine.com...
Need help?
Do you have a question about the SirenSat Offshore and is the answer not in the manual?
Questions and answers