Table of Contents
Advertisement
RECORD
PLAY
RECORD
PLAY PROCEDURE
(AUTO PLAY)
(1)
Set the stereo amplifier to the record
play mode.
For details, refer to the Operating Instructions of the stereo
amplifier.
(2)
Open the dust cover.
(3)
Press the POWER
switch to turn on the
power.
(4)
Place the record onto the platter.
NOTE:
e
When playing specially colored (transparent, red, yellow, etc.)
records, use manual play.
©
When playing recards other than 30 em (12"'), or 25 em {10} on
33-1/3 rom,
or other
than
17 em
{7"} records on 45 rpm,
set the record speed by pushing the speed switch:
For 33-1/3 rpm records, set to the [33] position.
For 45 rpm records, set to the [45] position.
(5)
Close the dust cover.
(6)
Press the START/STOP switch to start
play.
Auto play may not be possible with some specially colored
records. In this event, press the LOCATE/SKIP
switch and
play the record manually.
(7)
Adjust the volume and tone using the
controls on the stereo amplifier.
(8)
Play ends.
The tonearm will automatically return to its rest, and the turn-
table will stop rotating.
(9)
Open the dust cover and remove the record
from the platter,
MANUAL
PLAY
Proceed
with
manual
play in the following
cir-
cumstances:
e@
When starting play at any track except the first.
e
When
the size of the record is not standard
which
makes auto play impossible.
{1}
Perform
steps
(1)
through
(5) of
the
RECORD
PLAY PROCEDURE.
(2)
Press the LOCATE/SKIP
switch to move
the tonearm over the record.
(3)
Press the ARM
ELEVATION
switch and
start record play.
(4)
Adjust
the volume
and
tone
using
the
controls on the stereo amplifier.
(Upon completion
of record play, the tonearm
returns
automatically to the arm rest.)
REPEAT PLAY
One side of the record is repeatedly played
automatically.
(1)
Perform steps (1) through (6) of
RECORD
PLAY PROCEDURE
and start
auto play.
(2)
Press the REPEAT switch to the ON
position.
(3)
Play ends. Play is repeated.
When
the last track is played,
the tonearm
automatically
returns to the first track and play is repeated.
This operation will be repeated up to 8 times (during the 8th
playback,
the
indicator
will
flash
to
indicate
the
final
playback}.
NOTE:
During programmed play, the tracks will be played repeatedly in
their programmed order. Also, wher the final programmed tack is
played back, the player will be ready to accept new programmung for
programmed play. If the REPEAT switch is set to [ON/ at this time,
the REPEAT indicator will light, but repeat play will not begin.
To
start repeat playback, press either the
START/STOP
switch, or the
PROGRAM switch.
\
I
\
|
Advertisement
Table of Contents
