Table of Contents
Advertisement
OPERATIONS
BEFORE
USE
STEP 2
CONNECTING
THE TURNTABLE
AND AMPLIFIER
Turntable
Deck control terminal
Output
Connecting the ground wire
Attach the metal fitting onto the amplifier ground (GND) ter-
rainal.
Connecting the output cords
Insert the plugs into the amplifier's PHONO" input terminals.
©
Connect the white plug to the left (L) channel and the red
plug to the right (R) channel.
®
Insert the plugs as far as they will go.
Connecting the power cord
Connect the power plug to the auxiliary "AC OUTLET" on the
amplifier or to a household power outlet.
Deck control terminal
Connect this terminal to the synchro-recording cord of the
Pioneer
tape
deck
(CT-Z99W).
For details, refer to the
section 'Synchro Recording."
AFTER HAVING
CARRIED OUT STEPS 1
THROUGH
2, READ THROUGH
THE FOLLOWING
CHECKPOINTS.
B& Incorrect connections at installation will lead to trau-
bie.
©
if the equipment is conn
d improperly, no sound will be
heard. If the output
cord plugs are not inserted as far as
they will qo or if the
ground wire is not
connected, a hum.
ming noise
will be heard through the st
e
if the turntable
is insialled at an angle, the tonearm will
slide on the
rd and the
sound will be distorted,
If vibra-
tions are transmitted to the turntable,
the sound may be
discontinuous or it may tremble, and in some cases howl (a
prolonged wailing sound from the speakers) may be heared.
Aakers
® Connection must be made to the amplifier's PHONO
MM terminals.
The cartridge supplied with this unit is an IM type. Since tt has
a high output, it should be connected
to the MM
(moving
magnet) terminals.
@ The connecting cords shouid be given some slack,
Check that none of the connecting cords
are pulled
taut
after
they have been connected. Tautness may lead to cord digcon-
nections and howl
@ The load impedance
of the accessory cartridge is $0
kiiohms
If your stereo ampiitier is provided with a
the cartridge load impedance,
set this switch to t
rated value.
iteh tor
itvidge's
& Do not expose to direct sunlight or extremely bright
incandescent light bulbs, etc,
Because
this turntable utilizes an optical scan
other strong
light sources may also affect the proper operation
of the turntable.
Advertisement
Table of Contents
