Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Racelogic Manuals
  4. Car Navigation system
  5. VBOX 3iS
  6. Manual

Racelogic VBOX 3iS Manual

03 front panel single antenna v1
Hide thumbs Also See for VBOX 3iS:

Advertisement

Quick Links

Download this manual
03 Front Panel - VBOX 3iS Single Antenna (v1)
Overview
To facilitate unit configuration, VBOX 3iS has an OLED
display and four membrane buttons on the front panel.
Alternatively, you can use VBOX Manager to configure
the VBOX 3iS unit. VBOX Manager will mirror the
functionality of the front panel on the VBOX 3iS.
Buttons
Menu up / Increase the
value when editing a
number.
Menu down / Decrease
the value when editing a
number.
https://en.racelogic.support//Product_Info/Sensors/VBOX_3iS_Product_Range/VBOX_3iS_Single_Antenna/
VBOX_3iS_Single_Antenna_(v1)/User_Guide_-_VBOX_3iS_Single_Antenna_(v1)/03_Front_Panel_-
Move to the previous
menu level.
Enter the menu / select
menu item for adjustment.
_VBOX_3iS_Single_Antenna_(v1)
1

Advertisement

loading

Related Manuals for Racelogic VBOX 3iS

Summary of Contents for Racelogic VBOX 3iS

  • Page 1 03 Front Panel - VBOX 3iS Single Antenna (v1) Overview To facilitate unit configuration, VBOX 3iS has an OLED display and four membrane buttons on the front panel. Alternatively, you can use VBOX Manager to configure the VBOX 3iS unit. VBOX Manager will mirror the functionality of the front panel on the VBOX 3iS.

  • Page 2: Settings Menu

    Display Startup When the VBOX 3iS is powered up, it will display the RACELOGIC logo along with the serial number of the unit. Next, it will change to display the firmware version of the unit. When the unit has initialised and any...
  • Page 3 For less dynamic applications, such as steady state speed measurement or coast-down testing. Sets the DGNSS mode. DGNSS Mode Differential GNSS is off. None (default) SBAS differential corrections are received from the nearest Geo-stationary SBAS satellite. SBAS https://en.racelogic.support//Product_Info/Sensors/VBOX_3iS_Product_Range/VBOX_3iS_Single_Antenna/ VBOX_3iS_Single_Antenna_(v1)/User_Guide_-_VBOX_3iS_Single_Antenna_(v1)/03_Front_Panel_- _VBOX_3iS_Single_Antenna_(v1)
  • Page 4 RTCM corrections are received by the VBOX 3iS via a Racelogic telemetry module and a locally placed Base station. Contact Racelogic or your local agent for more RTCM details. This setting configures the DGNSS baud rate. To make sure that VBOX 3iS receives the DGNSS DGNSS Rate correction signal, you must set the correct DGNSS rate.
  • Page 5 Note: This option is only presented when the IMU integration is 'Enabled'. This setting specifies whether you are using a roof- mounted IMU from Racelogic or not. When it is 'Enabled', it will automatically add a 1 m z- offset, translating the filtered speed down into the Roof Mount vehicle towards the centre of gravity.
  • Page 6 IMU to the nominated reference point where all measurements will be made. Select the orientation of the VBOX 3iS side facing down. This is only applied once the IMU menu is exited to the Main Menu. When the orientation is changed, the Kalman Filter is reset.
  • Page 7 125 kbit/s, 250 kbit/s, 500 kbit/s (default), and 1 Mbit/s Enables or disables the CAN Termination. CAN Termination Output Rate Determines the rate at which data is sent out via CAN. 1 Hz, 5 Hz, 10 Hz, 20 Hz, 50 Hz, and 100 Hz (default) https://en.racelogic.support//Product_Info/Sensors/VBOX_3iS_Product_Range/VBOX_3iS_Single_Antenna/ VBOX_3iS_Single_Antenna_(v1)/User_Guide_-_VBOX_3iS_Single_Antenna_(v1)/03_Front_Panel_- _VBOX_3iS_Single_Antenna_(v1)
  • Page 8 GNSS speed must be greater than 5 km/h and the virtual line will be perpendicular to the direction of travel. Double-press the input switch. Set a split line For this to register, the GNSS speed must be greater https://en.racelogic.support//Product_Info/Sensors/VBOX_3iS_Product_Range/VBOX_3iS_Single_Antenna/ VBOX_3iS_Single_Antenna_(v1)/User_Guide_-_VBOX_3iS_Single_Antenna_(v1)/03_Front_Panel_- _VBOX_3iS_Single_Antenna_(v1)

  • Page 9: Digital Output

    End Speed - Defines the end speed at which the test will end (0 km/h by default). Auto corrected - This sets the speed sensor to use the Corrected Dist. nearest rounded 10 km/h speed when the trigger is https://en.racelogic.support//Product_Info/Sensors/VBOX_3iS_Product_Range/VBOX_3iS_Single_Antenna/ VBOX_3iS_Single_Antenna_(v1)/User_Guide_-_VBOX_3iS_Single_Antenna_(v1)/03_Front_Panel_- _VBOX_3iS_Single_Antenna_(v1)
  • Page 10 Split to Split time SF - Split or Split - Split Robot Mode Sets VBOX 3iS up for connection to a Robot. You can find more information here. Select this option to disable the Robot mode. Off (default) https://en.racelogic.support//Product_Info/Sensors/VBOX_3iS_Product_Range/VBOX_3iS_Single_Antenna/...

  • Page 11: Kalman Filter

    When the unit has detected the speed, the display will show an indication of the Kalman Filter quality in relation to the Speed Quality Channel output on CAN ID 0x306. The display will read either: • Low Accuracy when the speed quality is >0.1 km/h. https://en.racelogic.support//Product_Info/Sensors/VBOX_3iS_Product_Range/VBOX_3iS_Single_Antenna/ VBOX_3iS_Single_Antenna_(v1)/User_Guide_-_VBOX_3iS_Single_Antenna_(v1)/03_Front_Panel_- _VBOX_3iS_Single_Antenna_(v1)

  • Page 12: Factory Reset

    Up and Down arrow buttons simultaneously and holding them for 5 seconds. After this period, the screen will go blank and reboot to the start-up screen. Note: Receiver settings (Dynamic Mode, DGNSS Mode, DGNSS Rate and Elevation mask) will not reset. https://en.racelogic.support//Product_Info/Sensors/VBOX_3iS_Product_Range/VBOX_3iS_Single_Antenna/ VBOX_3iS_Single_Antenna_(v1)/User_Guide_-_VBOX_3iS_Single_Antenna_(v1)/03_Front_Panel_- _VBOX_3iS_Single_Antenna_(v1)