Setting Up The Omnicharge Solar Charger - tbs electronics Omnicharge Solar OCS 100-20 Owner's Manual

3.2

Setting up the Omnicharge Solar charger

Invalid battery type or other parameter settings can cause serious damage to your
batteries and/or connected battery loads. Always consult your battery's documentation
for the correct charge voltage settings.
As explained earlier, when you wish to setup the charger in a clearer way or wish to create a charge
program with different voltages or other parameters, the Dashboard Mobile app is the way to go.
If from the settings screen
you have pressed the
Setup button, the first
screen on the right will
appear. In this screen you
can select the desired
battery type by pressing
the upper button.
When you have selected
battery type Flooded,
AGM, Gel, Lithium 12V or
Lithium 24V and then
press the back button, all
corresponding settings
can be reviewed but not
edited. This is because
these are the factory
default battery types /
charge programs. For
most applications the
standard charge programs
will be sufficient.
When the desired battery
type has been selected,
please press the back
button and the app will
ask you to save this
setting or not. Press 'Save'
and the charger will be
updated.
!
CAUTION
15