Omnicharge Solar Setup; Using The Dashboard Mobile App - tbs electronics Omnicharge Solar OCS 100-20 Owner's Manual

3. OMNICHARGE SOLAR SETUP

All information on how to commission the Omnicharge Solar charger, how to interpret the LED
indicators on the device and how to select the battery type using the setup button on the device
itself, is explained in chapter 3 of the installation manual. This manual is included with the charger or
can be downloaded from our website at tbs-electronics.nl/downloads. For a more advanced setup
and insight in real time parameter data, please use our Dashboard Mobile app.
3.1

Using the Dashboard Mobile app

The easiest way to setup your Omnicharge Solar charger is to use the TBS Electronics Dashboard
Mobile app. You can find this app in the Apple App Store and Google Play. Besides setting up the
charger, this app will also provide you with real time information about the chargers' operation and
access to historic data like solar energy yield and maximum power per day. The global operation of
the Dashboard Mobile app is explained below using the iOS version. The Android version will
however be very similar with only some differences in the system messages when making a
Bluetooth connection. For Android, do make sure that you also allow Location Permission and select
'Precise' and 'While using the app' after that. (TBS Dashboard does not locally or externally store any
personal, usage or location data)
Once the app is installed and launched you
will see the screen as shown on the right.
Please press 'Allow' to confirm acceptance
of this notifications request.
After that, please press the 'Add Device'
button at the bottom of the screen.
11