Related Manuals for Brightline L1.4 ONE Series
Summary of Contents for Brightline L1.4 ONE Series
- Page 1 SeriesONE L1.4 LED Studio Fixture Operating Instructions Specifications are subject to change without notice. ©2023 Brightline LP All Rights Reserved.
- Page 2 Serial #: Date of Purchase: Product Descrip!on The Brightline L1.4 is a 200 watt, DMX512-controlled, energy-efficient LED light fixture. This fixture combines digital electronics with a state-of-the-art optical system to produce a soft, full-spectrum, flicker-free light source. Specifications are subject to change without notice.
- Page 3 “twofers” is not advised. 3. You can use up to 32 Brightline DMX fixtures on a single DMX data line. If there are more than 32 units, the use of a DMX repeater amplifier or splitter amplifier is required. A repeater amplifier is an electronic device that boosts the DMX signal.
- Page 4 3. To disconnect the male end of the cable, press in the release button on the female receptacle and pull the plug out of the receptacle. Pressure should be applied to the plug, not the cables. Specifications are subject to change without notice. ©2023 Brightline LP All Rights Reserved.
- Page 5 Setting the DMX Address DISPLAY POWER ON FIXTURE PRESS AND HOLD FOR 3 SECONDS TO START Specifications are subject to change without notice. ©2023 Brightline LP All Rights Reserved.
- Page 6 Yoke Installation Specifications are subject to change without notice. ©2023 Brightline LP All Rights Reserved.
Need help?
Do you have a question about the L1.4 ONE Series and is the answer not in the manual?
Questions and answers