Advertisement
Quick Links
Advertisement
Related Manuals for Brightline cMe3
Summary of Contents for Brightline cMe3
- Page 1 Assembly and Installation Instructions...
-
Page 2: Specifications
Specifications Fixture Features • Custom heat sink • Internal glare control filter • External soft light diffusion • Focusing handle • Articulating light cell • 2.4G RF remote for on/off, dimming and tunable white (2700K to 6500K) control • Hardwire and plug-in power supply options •... - Page 3 Packing List Part Description Image Quantity Main Housing with Diffuser Canopy Back Plate Plug-in Power Supply Diffuser Allen Wrench Canopy Allen Wrench Remote Control (batteries included)
- Page 4 CMe3 Packing List. If any parts are damaged do not attempt to install the fixture. cMe3 is fully encapsulated in a protective foam pack and every precaution has been taken to ensure your unit arrives safely and ready for use; however, damage in shipment can occur. In the unlikely event the Main Body Housing diffuser is damaged in transit, please notify Brightline and a replacement part will be sent to you.
-
Page 5: Installation Instructions
Installation Instructions cMe3 can be installed by hardwiring direct to a wall junction box with 120V-240V AC circuit OR you can mount cMe3 to the wall surface and plug into a standard 120V 50/60 Hz three-prong outlet. WARNING - RISK OF FIRE AND ELECTRICAL SHOCK. FIXTURE MUST BE INSTALLED BY A QUALIFIED ELECTRICIAN ONLY IN ACCORDANCE WITH NATIONAL, LOCAL BUILDING AND ELECTRICAL CODES. - Page 6 Connect the Supply Black, Ground and White (L-G-N) wires from the junction box to the terminal connection box of the cMe3 as shown below. IMPORTANT: THERE ARE THREE (3) WIRES (SHOWN BELOW) FROM THE MAIN HOUSING CANOPY THAT CONNECT TO THE PLUG-IN RECEPTACLE AND ARE ONLY USED FOR THE PLUG-IN POWER SUPPLY INSTALLATION METHOD.
- Page 7 Because of the various types of installation methods and wall materials, hardware is not provided for this step. Be sure the method to anchor the Canopy Back Plate (B) is rated to hold cMe3 weight and normal usage. A 120V 50/60 Hz AC 3-prong outlet must be within five feet of the Canopy Back Plate to ensure a direct connection using the Plug-in Power Supply (C).
- Page 8 3/8” as shown. 3/8” 3. Connect the Black, Ground and White (L-G-N) wires from the Plug-In receptacle located in the Main Body Housing to the terminal connection box of the cMe3 as shown below. Black / Live Ground...
- Page 9 4. Remove the receptable Plug-In cover plate as shown below using a #2 Philips Screwdriver (not included). 5. Install the Main Housing Canopy to the Canopy Back Plate as shown below. Be sure to tuck all wires neatly into the Main Housing Canopy and align the four slotted holes on the Main Housing Canopy with the Canopy Back Plate holes.
- Page 10 1) Install two type AAA batteries (not included) in the cMe3 Remote (F) and close the back cover. Have the remote nearby for Steps 2 – 4. 2) Once cMe3 is installed and power is going to the fixture, proceed to turn the fixture ON using the round toggle switch at the bottom of the Main Housing Canopy.
- Page 11 The Articulating Light Bar may be rotated upward or downward to adjust light output direction. Adjustments should be made using the Light Bar handle on the back of cMe3 as shown below. Never attempt to rotate the Light Bar using the diffuser or post extensions.
- Page 12 If any product is found to be unsatisfactory under this warranty, the buyer must notify Brightline immediately. Once a course of action has been determined, if it is necessary to return the product to Brightline a Return Authorization (RA) will be issued. Ship the product directly to Brightline, 580 Mayer Street, Building #7, Bridgeville, PA 15017.
Need help?
Do you have a question about the cMe3 and is the answer not in the manual?
Questions and answers