Operation-Washer Operation Overview - LG WASH TOWER WT-B12103WD Owner's Manual

OPERATION-WASHER
Operation Overview
Using the Washer
Before the first wash, select the Cotton wash
programme and add a half amount of the
detergent. Start the appliance without clothes. This
will remove possible residues and water from the
drum that may have been left during
manufacturing.
1
Sort clothes by fabric type, soil level, colour and
load size as needed.
2
Open the door and load items into the
appliance.
CAUTION
• Before closing the door, ensure that all clothes
and items are inside the tub and not
overhanging on the rubber door seal where they
will become caught when the door is closed.
Failing to do so will cause damage to the door
seal and the clothes.
3
Close the door.
OPERATION-WASHER
CAUTION
• Remove items from the flexible door seal gasket
to prevent clothing and door seal damage.
4
Add cleaning products or detergent and
softener.
• Add the proper amount of detergent to the
detergent dispenser. If desired, add bleach
or fabric softener to the appropriate areas of
the dispenser.
5
Press the Power button to turn on the
appliance.
6
Choose the desired cycle.
• Press the cycle button repeatedly until the
desired cycle is selected.
• Now select a wash temperature and spin
speed. Pay attention to the fabric care label
of your clothes.
7
Begin cycle.
• Press the Start/Pause button to begin the
cycle. The appliance will agitate briefly
without water to measure the weight of the
load. If the Start/Pause button is not
pressed within a certain time, the appliance
will shut off and all settings will be lost.
8
End of cycle.
25